PDQ Plastic Rack
 Do
you have sheet plastic stacked in corners and against the wall?
Can't find the right color or size because all of your plastic
is in piles? Is it getting damaged in this environment? The
PDQ Plastic Rack stores all of your sheet plastic in an orderly
manner while protecting it from harm. Available in two sizes,
30"h x 52"w x 32"d or 44"d.
Order RACKSMALL {small}
RACKLARGE {large}
|
|
PDQ Mold Library
 Get
your casts up off the floor and into the PDQ Mold Library! Whether
it?s a child's AFO cast or a behemoth body jacket, our specially
made rack will protect it from the harm that can come from it
sitting on the floor. Keep your molds neat and orderly. Store
them in a PDQ Mold Library. 84"h x 36"w x 16"d.
Order MOLDLIBRARY |
|
PDQ Oven Gloves
 These
terry cloth gloves are the ultimate thermoforming gloves! They?re
thick enough to protect your hands from the heat of the plastic
and long enough to protect your forearms too. Don't burn you
hands and arms! Use our gloves and beat the heat!
Order SUPGLOVE |
|
| PDQ Bubble Forming Frame  The
PDQ Bubble Forming Frame was designed by four prominent prosthetists
and manufactured to work best in the PDQ Infrared Ovens. The
round hole was chosen to reduce plastic stretch at the corners
and increase platen contact. Four easy to use spring clips hold
the plastic in place and will accommodate any thickness of plastic.
The bottom of the frame is made wider facilitate handling and
supports the frame inside a PDQ Benchtop ovens. Available in
five sizes.
Order BFF {9",12",16",18",24"}
BT-3 ovens require special frames please add BT-3 to end of
part number. |
|
| PDQ Powdercoating System  We
call it "Paint with an Attitude"! The PDQ Powdercoating System
is the ultimate coating system. Not only does it add color,
it also provides chemical and corrosion protection to the surface
to which it's be applied. Available in every color in the rainbow,
and some that aren't, including textured coatings. It?s also
easy to use! Simply clean and degrease the part, spray it with
powder and bake it for ten minutes. It?s that simple. With hundreds
of uses, you'll find it an invaluable tool in you lab. Comes
with Gloss Black powder to get you coating immediately. All
you need is an air compressor with a regulator and an oven.
Order SUPGUNKIT |
| |
